Waterjet low pressure water system consists of cutting water inlet system and cooling water inlet system. This section will show the details.
Cutting water inlet system provides cutting water flow and pressure to the intensifier. The low pressure inlet water system components include input water filter components and booster pump. Connected to the PLC with the pressure switches and temperature switches, it can monitor the inlet cutting water condition. If it goes beyond the inlet water requirements, it will shutdown the pump automatically.
Input cooling water flows through the oil/water heat exchanger (cooler) in order to control the temperature of the hydraulic oil. Then the cooling water flows out from the cooling water outlet into the drain or into a customer to provide water cooler. This path make up to the chilling circulation.
Consumption Peak: 15.4L/min
The Minimum Inlet Pressure: 0.3MPa
The Best Inlet Water Temperature: 18掳C
The Highest inlet Water Temperature: 29掳C
Consumption Peak: 11.4L/min
Minimum Working Oil Temperature: 15掳C
Best Working Oil Temperature: 46掳C
The Minimum Inlet Pressure: 0.25MPa
The Highest Water Pressure 0.75MPa