A16*2 pump is the New Generation of waterjet pumps is the BEST solution for manufacturers requiring exceptional performance and inestimable value.
A16*2 Pump Performance
APW waterjet A16*2 pump is the New Generation of waterjet pumps, which is powered by high-pressure waterjet dual-intensifiers.
There are 2 intensifiers in this pump. These 2 intensifiers work at the same time. During the process, the cutting speed will be increased by 30%-50%. Even though, the psi on the each intensifier dose not be changed(60000psi), in most application areas, the final cutting effects are comparable with the intensifier owning 96000psi. The pump delivers double power, by cutting products in half the time over conventional 60,000 psi - 100 HP waterjet systems.
On the other side, Our A16*2 pump using the same quick-wear parts with regular waterjet parts, which greatly reduces the maintenance cost. It is the BEST solution for manufacturers requiring exceptional performance and inestimable value.
60,000 psi at 100 HP with dual-intensifiers.
Dual Intensifiers for Maximum UHP, Maximum HP and Maximum Productivity.
Downwards compatible to 30,000 psi operational pressure when less waterjet force is needed to complete the project.
Sophisticated software includes remote access and ability to network multiple pumps.
Double front doors for easy access and maintenance with padded insulation for sound reduction.
Multiple language controls.
Ceramic plungers for maximum reliability.
A16*2 Pump System Parameter
Nominal Power: 100hp (75kW)
Max. Pressure Range: 60,000psi (4,137bar)
Max. Water Flow Rate: 55,000psi(3,792bar): 1.90gpm (7.20lpm)
Max. Single Orifice Diameter: 0.018" (0.45mm)
Power Supply: 3-Phase, 380V/50Hz
Max. Noise Level: 75dB(A)
Ambient Operating Temperature: Min.: 40藲F (5藲C); Max.: 104藲F (40藲C)
Ambient Storage Temperature: Min.: 35.6藲F (2藲C); Max.: 104藲F (40藲C)
Length: 82.68" (2,100mm)
Width: 50.00" (1,270mm)
Height: 55.91" (1,420mm)
Weight: 3,748lb (1,700kg)
Min. Inlet Cutting Water Flow: 4.0gpm (15.1lpm)
Min. Inlet Cutting Water Pressure: 35psi (2.4bar) flowing
Accumulator Volume: 0.26gal (1.0L)
Max. Hydraulic Pressure: 2,900psi (200bar)
Hydraulic Reservoir Capacity: 53gal (200L)
Cooling Water Consumption at 75藲F (24藲C) Water Temp.(Max.): 3.0gpm (11.4lpm)
Min. Cooling Water Pressure: 43.5psi (3.0bar)